FlowCAM® VS Series - Benchtop Model

 

The FlowCAM VS benchtop model is ideally suited to a typical laboratory environment. The system can be configured in a variety of ways to fit your specific needs. The flexibility of the FlowCAM VS allows you to optimize the system for counting and sizing, superior image quality, and morphology characterization. The FlowCAM VS is available in four models, from the imaging-only VS-I to the top-of-the-line VS-IV with two channels of fluorescence measurement and scatter trigger capabilities. Each system is fully upgradeable to meet changing customer needs and technology improvements..

 

FlowCAM Features:

  • Flexible and customizable system meets user-specific requirements.

  • Four magnifications (2X, 4X, 10X, and 20X) and various flow cell sizes are available to accommodate a broad range of sample particle sizes (2 µm to 2 mm) - easy to alternate between multiple analytical ranges.

  • Sample volumes as low as .01ml accommodated

  • Captures particle images at up to 22 frames per second - allows for high sampling efficiency and fast analysis times.

  • New Auto Focus feature makes the FlowCAM VS even easier to use - provides consistent, reliable performance.

  • Intuitive VisualSpreadsheet® software for data capture and analysis

  • Fully self-contained (computer, monitor, etc. included)

  • Many options available including cross-polarized illumination, 488 or 532nm laser, variable emission filters, color camera and many different flow cell sizes

FlowCAM® PV Series

 

The FlowCAM PV offers an economical application-specific imaging particle analysis system with a small footprint. The operation of the FlowCAM PV is simple and straightforward. Simply load sample, and initiate run by touching a single button. The FlowCAM PV is best suited for laboratories where similar types of samples are run continuously.

 

Highlights:

  • Ease-of-Use: no setup, all functions computer-controlled via software (including priming, rinsing, etc.)

  • Fast acquisition of thousands of particle images - get size and shape measurements in seconds.

  • Intuitive VisualSpreadsheet® software for rapid filtering, classification and enumeration of different particle types

  • Touch-Screen and/or mouse-driven user interface

  • Compact footprint - 9.5” W x 16.5” D x 10.5” H.

  • Two models available:

    • PV-40 offers 4X magnification and is best suited for particles from 5 µm to 300 µm.

    • PV-100 offers 10X magnification and is best suited for particles from 2 µm to 80 µm.

FlowCAM® VS Series - Portable Model

 

Housed in a rugged, small portable case, the Portable FlowCAM VS has all of the features of a Benchtop FlowCAM VS, but in an easily transportable package ideal for collecting particle image data at remote locations. The system is entirely self-contained, with the monitor installed on the case lid, and wireless keyboard and mouse packed inside. A handy travel pull handle extends from the case along with rolling wheels for easy transport.

 

Portable FlowCAM Features:

  • Compact, transportable case

  • Operates on 120/240VAC or 12V DC (car battery or accessory plug)

  • Fully self-contained (computer, monitor, etc. included)

  • Four magnifications (2X, 4X, 10X and 20X) available to accommodate broad range of sample particle sizes (2µm to 2mm)

  • Intuitive VisualSpreadsheet© software for data capture and analysis

  • Many options available including cross-polarized illumination, 488 or 532nm laser, variable emission filters, color camera and many different flow cell sizes

PetroCAM®

Oil in Water Particle Analysis System

 

Combining superior optical engineering with state-of-the-art imaging analysis software, the rugged PetroCAM® accurately analyzes the size and concentration of oil droplets and solid particles in fluids, and is able to discriminate oil from solids using particle shape.  The lightweight portable system is connected to a laptop for control and analysis, easing field analysis.

 

PetroCAM instantly displays particle size and shape distributions, and also calculates concentrations for oil in water and other particulate matter contained in fluids. The images enable automated measurements and allow for quantitative and qualitative review of the particle images for greater process understanding, as well as an archival record of the actual particles used to create the measurements.

 

PetroCAM Features:

  • Pressures up to 2000 psi

  • 24/7 On-line Monitoring

  • Identification and Analysis of Particles and Droplets

  • Stainless Steel Enclosure

  • Intuitive VisualSpreadsheet Software

  • Laptop PC Controllable

  • Size Distribution Display

  • Concentration Calculations

  • Multiple Solids Identified 

  • Lightweight and Portable

  • Rugged and Dependable Operation

FlowCAM® ES

Imaging Particle Analysis System for On-Line Analysis of Particulates in Process Fluids

 

Using FlowCAM® technology, it is possible to engineer systems to measure particle size and shape in an "on-line" configuration. Our FlowCAM ES is a patent-pending, engineered system that is custom-designed for these on-line applications.

 

Capable of being installed and operated directly at the production facility, the FlowCAM ES provides real-time on-line analysis of any fluid-born particulates. The system can automatically dilute the fluid coming from a process line or vessel if necessary, and then return it to the supply or to waste after analysis. Powerful image recognition algorithms automatically identify different particulate types in the process stream, and report concentrations for each. These results can be used for trend analyses, as well as to monitor for, and report any impurities that might be present.

 

FlowCAM - ES is an engineered system with a specific implementation for any given process stream. Fluid Imaging Technologies' product and process experts work directly with the end customer to deliver a turnkey solution for each process stream and application.

 

FlowCAM ES Features:

  • On-Line: Direct, real-time measurements

  • Automated particle characterization and enumeration

  • Direct connection to process line or vessel

  • Fully automated image and data capture

  • Flexible configuration options

  • Consulting to adapt to your specific environment

  • Intuitive VisualSpreadsheet Software

Tel (GL): +603 - 7845 1111 | Fax: +603 - 7842 1112 | Service Hotline:  012-223 7074