Material Science
Solutions for Thermal & Thermophysical Analysis

 

Dynamic Mechanical Analyzer

High-Temperature DMA/DMTA

 

All EPLEXOR® instruments can be delivered in high-temperature versions. Two high-temperature furnaces are available: RT to 1000°C and RT to 1500°C. Both furnaces feature heating rates between 0.1 K/min and 30 K/min.

With a standard furnace (-150°C to 500°C) simultaneously mounted, it is possible to carry out consecutive test runs in the high- and the low-temperature range.

 

The application fields of HT-EPLEXOR® systems cover ceramics, glasses, metals, all kind of composites, polymers and other organic substances i.e., a very broad spectrum of material properties.The electronics of the system identifies automatically which furnace is currently used.

 

 

Technical Specification:

 

ŸTemperature range: -150°C to 1500°C

 

Frequency range: 0.01 to 100 Hz; optional: 0.0001 Hz; 200 Hz

 

Static force range: From 1500 N up to 8000 N

 

Dynamic force range: from ± 25 N up to ± 8000 N

 

Force sensor: Interchangeable, nominal forces available from 10 N to 12000 N

Ÿ 

Blade springs: For compensation of high static forces and for extending the measuring range Ÿ 

 

Static displacement:  Max. 50 mm Ÿ 

 

Work space of the high-temperature furnaces: Cylindrical chamber, diameter: 70 mm, height: 120 mm

You may also be interested in:

Tel (GL): +603 - 7845 1111 | Fax: +603 - 7842 1112 | Service Hotline:  012-223 7074