Material Science
Solutions for Thermal & Thermophysical Analysis
Differential Scanning Calorimetery (DSC)
Photo-DSC 204 F1 Phoenix® – Differential Photocalorimeter
For UV Curing And More
The main advantage of light-curing systems is their fast reaction time. Monomer solutions which are mostly free of solvents can be cured within only a few seconds and already at low temperatures. A combination of thermal and light curing reactions is often applied to dual cure adhesives or paints.
The NETZSCH Photo-DSC 204 F1 Phoenix®, Differential Photocalorimeter, works in the temperature range from -100°C to 200°C. The Differential Photocalorimetry instrument has a gas-tight measuring cell and the purge gas control is regulated by a mass flow controller (MFC).
For our Photo-DSC 204 F1 Phoenix®, Differential Photocalorimetry system, most standard industry or laboratory lamps for cationic or radically curing material systems can be used.
Technical Specification:
Temperature range: -100°C to 200°C
Crucibles: open aluminum
Recommended Hg-lamp types: DELOLUX 04 OmniCure® S 2000
Max. power: 9.9 W/cm2 >10 W/cm2
Wavelength range: 315 nm to 500 nm* 320 nm to 500 nm*
Irradiation time: 0.1 s to 1000 s 0.2 s to 1000 s
Existing orifice diameter: 8 mm, 4 mm, 2 mm 8 mm, 4 mm, 2 mm
Life time (lamp): 1500 h 2000 h
