The new CAMSIZER X2 provides particle size and shape distribution analysis needed for the quality control of fine powders and suspensions.


A range of sample presentation devices feed the sample to the measurement zone and provide the desired dispersion energy in order to de-agglomerate the sample without breaking individual particles.

Application Examples

Industries and applications benefiting from size and shape analysis by the CAMSIZER X2 include fine powders such as sand, abrasives, food, polymers, crushed glass, building materials, metal and ore powders, and pharmaceutical powders/granules. Measurement time is ~ 1 to 3 min depending on the desired measuring statistics. Reported result parameters include smallest diameter, length, mean diameter, aspect ratio, symmetry, sphericity, and convexity. Results can easily and accurately match historic results from other techniques (sieves, microscopy, diffraction) with the appropriate selection of result parameters and automated software features.


  • Simultaneous analysis of particle size and shape

  • Digital image processing with patented two-camera-system (acc. to ISO 13322-2)

  • Wide dynamic measuring range from 0.8 μm to 8 mm

  • Measuring narrow as well as very wide size distributions within one measurement and without any adjustments such as changing lenses, re-focusing, or re-calibration

  • Measuring size range is 1 µm - 3 mm for the X-Jet module and 10 µm - 8 mm for the X-Fall module

  • Newly developed optical system with ultra-strong LEDs for highest resolution and excellent depth of field for image sharpness

  • Reliable detection of smallest amounts of “undersize” and “oversize”

  • Very short measurement time of 1 – 3 minutes

  • Modular system X-Change for dry and wet dispersion

  • Measurement results are 100% compatible to sieve analysis if required

  • Detailed particle size analysis - results are saved in more than 1,000 size classes

Tel (GL): +603 - 7845 1111 | Fax: +603 - 7842 1112 | Service Hotline:  012-223 7074